Match Fascia - Overhang

Purpose

To match overhangs between two or more planes

Prerequisites

An existing truss

Steps

To match overhangs between two or more planes:

1. From the Planes menu, select Match Fascia - OH.

The following prompt displays:

2. Select a plane or series of planes that need their overhang adjusted to match the fascia height of the plane selected in step 3.
3. Select the controlling plane (the plane with the desired fascia height).
4. Right-mouse click to accept.

Note: The overhang length of all selected planes, except the last, are increased or decreased to match the fascia height of the last selected plane.

• Match Fascia - Heel Height